How to replace the Rack and Pinion Boot on 2003 Chevrolet Trailblazer?

To replace a rack and pinion boot, the outer tie rod, rack and pinion gear must be removed first. Change all components of the boots and get rid of the fixing clamps. Take the old boot off, put grease on the new one, and put it on, and make sure it is properly aligned. Clamp and reattach gear and tie rod.

OEM 2003 Chevrolet Trailblazer Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack and Pinion Boot found

View related parts
2003 Chevrolet Trailblazer Tie Rod Boot Part Number: 26089593
$77.64 MSRP: $123.27
You Save: $45.63 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder; Rack and Pinion Bellows; Boot.; Boot Kit; Boot; Boot Kit, Tie Rod End Dust
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.8 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26089593
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2003 Chevrolet Trailblazer Rack and Pinion Boot

With a comprehensive array of OEM 2003 Chevrolet Trailblazer Rack and Pinion Boot, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Trailblazer Rack and Pinion Boot are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Trailblazer Rack and Pinion Boot Parts and Q&A

Q: How to replace the Rack and Pinion Boot on 2003 Chevrolet Trailblazer?
A: To replace a rack and pinion boot, the outer tie rod, rack and pinion gear must be removed first. Change all components of the boots and get rid of the fixing clamps. Take the old boot off, put grease on the new one, and put it on, and make sure it is properly aligned. Clamp and reattach gear and tie rod.