OEM 2003 Chevrolet Tracker Starter

2003 Chevrolet Tracker Starter Parts and Q&A

• Q: How to service and repair the starter motor on 2003 Chevrolet Tracker?

  A: A professional should begin with negative Battery Cable disconnection while following established battery safety procedures. Begin by detaching the Starter Solenoid electrical connector together with the air cleaner hose. The Starter Solenoid requires the removal of both its batteriy retaining nut and positive cable. The Starter motor on manual transmission vehicles contains two mounting bolts yet automatic transmission vehicles require a lower bolt combined with an upper nut and bolt for installation. Separate the starting motor assembly from the vehicle by first taking off the upper bolt and negative battery wire then the lower retaining bolt and assembly. Return the Starter motor assembly to its proper place within the vehicle and use the sequence of lower bolt, followed by upper bolt and ending with negative Battery Cable for installation. The Starter motor assembly mounting bolts must get tightened to 30 n.m (22 lb ft). Remove the positive Battery Cable from the Starter Solenoid then attach it securely with one nut before tightening it to 10 n.m (89 lb in). After reattaching the Starter Solenoid electrical connector and air cleaner hose install the negative Battery Cable last while tightening its terminal retainer to 15 n.m (11 lb ft).