How to replace the Power Folding Outside Mirror Switch on 2003 Chevrolet S10?

In order to change the Power Folding Outside Mirror Switch, unconnect the negative battery cable. Lift the switch and take away the accessory switch panel of the armrest. Unconnect the electrical connector, and connect it to the new switch. Install the panels again and reconnect the battery again.

OEM 2003 Chevrolet S10 Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mirror Switch found

View related parts
2003 Chevrolet S10 Mirror Switch, Rear Part Number: 19259976
$58.62 MSRP: $87.90
You Save: $29.28 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Rear View Mirror; Power Mirror Switch; Switch; Switch, Rear View Mirror - Inside & Outside
- Position: Rear
- Replaces: 15013100, 15720520
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19259976
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet S10 Submodels:
- Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS

2003 Chevrolet S10 Mirror Switch

With a comprehensive array of OEM 2003 Chevrolet S10 Mirror Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet S10 Mirror Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet S10 Mirror Switch Parts and Q&A

Q: How to replace the Power Folding Outside Mirror Switch on 2003 Chevrolet S10?
A: In order to change the Power Folding Outside Mirror Switch, unconnect the negative battery cable. Lift the switch and take away the accessory switch panel of the armrest. Unconnect the electrical connector, and connect it to the new switch. Install the panels again and reconnect the battery again.