How to replace the A/C Hose for the condenser on 2003 Chevrolet Monte Carlo?

The first step of condenser tube replacement requires refrigerant recovery and removal of air cleaner assembly and cross vehicle brace as well as vacuum Brake Booster. The procedure requires detachment of the condenser tube from support bracket and radiator air baffle along with the condenser tube nut from the condenser. First disconnect the condenser tube from the condenser, set the vehicle to a lower height, then disconnect the electrical connector from the a/c refrigerant pressure sensor. Proceedure begins with disconnecting the evaporator tube from the condenser tube by loosing the evaporator tube nut. Then remove the condenser tube while disposing of the o-ring. The a/c pressure sensor should be removed from the condenser tube. When installing the new condenser tube secure the a/c pressure sensor while placing a new o-ring between its elements before fastening the tube to the support bracket. After attaching the condenser tube to the evaporator tube tighten the evaporator inlet tube nut to 27 n.m (20 lb ft). Reinstall the a/c refrigerant pressure sensor electrical connector while raising and supporting the vehicle to install the condenser tube by tightening its nut to 27 n.m (20 lb ft). At the end the technician should replace the lower radiator air baffle alongside the vacuum Brake Booster while reinstalling cross vehicle brace and air cleaner assembly before conducting an a/c system leak test with the halogen leak detector (J 39400-A) after evacuation and recharging is performed.

OEM 2003 Chevrolet Monte Carlo A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 A/C Hoses found

View related parts
2003 Chevrolet Monte Carlo A/C Hose Part Number: 10308247
$55.99 MSRP: $105.14
You Save: $49.15 (47%)
ADD TO CART
Product Specifications
- Other Name: Evaporator Outlet Hose; A/C Refrigerant Liquid Hose; A/C Line; Accumulator Tube; Hose; Hose, A/C Refrigerant (Metal And Rubber Sections)
- Item Weight: 1.20 Pounds
- Item Dimensions: 22.3 x 11.7 x 19.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10308247
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2003 Chevrolet Monte Carlo A/C Hose Part Number: 10422443
Product Specifications
- Other Name: Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; Compressor Hose; Discharge Hose; Hose & Tube Assembly; Hose, A/C Compressor
- Item Weight: 2.80 Pounds
- Item Dimensions: 25.9 x 20.9 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10422443
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport | 6 Cyl 3.4 L GAS
View related parts
2003 Chevrolet Monte Carlo A/C Line Part Number: 10339261
Product Specifications
- Other Name: Tube Assembly-A/C Evaporator; A/C Refrigerant Liquid Hose; A/C Hose; A/C Tube; Evaporator Tube; Tube, A/C Refrigerant (All Metal)
- Replaces: 10433079, 10295391, 10445946
- Item Weight: 1.10 Pounds
- Item Dimensions: 36.4 x 17.2 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10339261
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2003 Chevrolet Monte Carlo A/C Hose Part Number: 19169348
Product Specifications
- Other Name: Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; Compressor Hose; Discharge Hose; Hose & Tube Assembly; Hose, A/C Compressor
- Replaces: 10348122, 10422442
- Item Weight: 1.90 Pounds
- Item Dimensions: 31.6 x 4.7 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19169348
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.8 L GAS
View related parts
2003 Chevrolet Monte Carlo Blower Motor Tube Part Number: 52487082
Product Specifications
- Other Name: Tube, Air Conditioner Blower Motor Cooling; A/C Refrigerant Liquid Hose; A/C Hose; Tube; Hose; Tube, A/C Blower Motor Cooling; Tube, Heater Motor Cooling
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.8 x 6.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52487082
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2003 Chevrolet Monte Carlo A/C Hose

With a comprehensive array of OEM 2003 Chevrolet Monte Carlo A/C Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Monte Carlo A/C Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Monte Carlo A/C Hose Parts and Q&A

Q: How to replace the A/C Hose for the condenser on 2003 Chevrolet Monte Carlo?
A: The first step of condenser tube replacement requires refrigerant recovery and removal of air cleaner assembly and cross vehicle brace as well as vacuum Brake Booster. The procedure requires detachment of the condenser tube from support bracket and radiator air baffle along with the condenser tube nut from the condenser. First disconnect the condenser tube from the condenser, set the vehicle to a lower height, then disconnect the electrical connector from the a/c refrigerant pressure sensor. Proceedure begins with disconnecting the evaporator tube from the condenser tube by loosing the evaporator tube nut. Then remove the condenser tube while disposing of the o-ring. The a/c pressure sensor should be removed from the condenser tube. When installing the new condenser tube secure the a/c pressure sensor while placing a new o-ring between its elements before fastening the tube to the support bracket. After attaching the condenser tube to the evaporator tube tighten the evaporator inlet tube nut to 27 n.m (20 lb ft). Reinstall the a/c refrigerant pressure sensor electrical connector while raising and supporting the vehicle to install the condenser tube by tightening its nut to 27 n.m (20 lb ft). At the end the technician should replace the lower radiator air baffle alongside the vacuum Brake Booster while reinstalling cross vehicle brace and air cleaner assembly before conducting an a/c system leak test with the halogen leak detector (J 39400-A) after evacuation and recharging is performed.