How to Replace a Fuel Level Sensor on 2003 Cadillac Escalade?

Replacement The fuel level sensor can be replaced by removing the sending unit and un-hooking the electrical connector. Turn the retaining tabs of the reservoir and make sure that they are not destroyed. Installation: To finish the installation, disconnect the reservoir and the module and put the new sensor on the reservoir and reconnect all the connections.

OEM 2003 Cadillac Escalade Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Level Sensor found

View related parts
2003 Cadillac Escalade Fuel Gauge Sending Unit Part Number: 19121640
$118.95 MSRP: $215.31
You Save: $96.36 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit; Level Sensor
- Replaces: 25335561, 89060638, 25316675
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.2 x 6.3 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19121640
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac Escalade Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2003 Cadillac Escalade Fuel Level Sensor

With a comprehensive array of OEM 2003 Cadillac Escalade Fuel Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Cadillac Escalade Fuel Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Cadillac Escalade Fuel Level Sensor Parts and Q&A

Q: How to Replace a Fuel Level Sensor on 2003 Cadillac Escalade?
A: Replacement The fuel level sensor can be replaced by removing the sending unit and un-hooking the electrical connector. Turn the retaining tabs of the reservoir and make sure that they are not destroyed. Installation: To finish the installation, disconnect the reservoir and the module and put the new sensor on the reservoir and reconnect all the connections.