OEM 2003 Buick Rendezvous Tie Rod

2003 Buick Rendezvous Tie Rod Parts and Q&A

• Q: How to replace the tie rod on a front-wheel-drive on 2003 Buick Rendezvous?

  A: The first step to change the tie rod on front-wheel-drive vehicles involves raising the vehicle and implementing proper support. The automatic level control sensor maintains its link connection to the sensor arm while the technician disconnects the electrical connector of the sensor. The height sensor link should be removed from the rear axle tie rod. Begin the replacement by unscrewing the rear axle tie rod bolts before extracting the rear axle tie rod. Start front-wheel-drive vehicle installation by connecting the rear axle tie rod to the vehicle while carefully following the Fastener Notice in Service Precautions. Afterward, proceed with tightening the rear axle tie rod bolts and nuts to 125 Nm (92 ft. lbs.). Serving the automatic level control sensor link requires special attention to prevent damage to the sensor link and sensor arm while making sure both components are correctly oriented to protect the automatic level control system. The height sensor link installation for vehicles with automatic level control should proceed with a connection to the rear axle tie rod followed by electric connector reconnection before vehicle height lowering takes place.