How to service the camshaft position sensor on 2003 Buick Regal?

The Camshaft Position Sensor can be serviced by first removing the coolant recovery reservoir and drive belt. Unscrew the electrical connector, unscrew the sensor bolt, and remove the sensor. To install, make sure that the sensor is once again in place, reattach the electrical connector, put back the drive belt and change the coolant recovery reservoir.

OEM 2003 Buick Regal Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2003 Buick Regal Camshaft Position Sensor Part Number: 10456148
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.3 x 2.3 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456148
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS

2003 Buick Regal Camshaft Position Sensor

With a comprehensive array of OEM 2003 Buick Regal Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick Regal Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick Regal Camshaft Position Sensor Parts and Q&A

Q: How to service the camshaft position sensor on 2003 Buick Regal?
A: The Camshaft Position Sensor can be serviced by first removing the coolant recovery reservoir and drive belt. Unscrew the electrical connector, unscrew the sensor bolt, and remove the sensor. To install, make sure that the sensor is once again in place, reattach the electrical connector, put back the drive belt and change the coolant recovery reservoir.