How to replace the brake backing plate on 2003 Buick Regal?

The process of replacing the Brake Backing Plate involves a vehicle being raised and suitably supported after which a tire and wheel assembly is removed, brake drum, and brake shoes removed. Next, you pull out universal spring and Wheel Cylinder, remove Parking Brake Cable from backing plate and Wheel Hub, and pull out rear Wheel Hub before finally taking out the backing plate. For installation remember to put the new backing plate first then the rear Wheel Hub and then reconnect Parking Brake Cable to the backing plate. Go on and install Wheel Cylinder, followed by universal spring, and brake shoes. Adjust the drum brakes, reinstall the Brake Drum, bleed the brake hydraulic system, and adjust the parking brake only to reinstall the tire and wheel assembly while lowering the vehicle.

OEM 2003 Buick Regal Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Backing Plates found

View related parts
2003 Buick Regal Backing Plate Part Number: 18025205
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Item Weight: 3.20 Pounds
- Item Dimensions: 12.2 x 11.7 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18025205
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
2003 Buick Regal Backing Plate Part Number: 18025206
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Item Weight: 3.10 Pounds
- Item Dimensions: 12.5 x 12.0 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18025206
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
2003 Buick Regal Backing Plate, Driver Side Part Number: 25990085
Product Specifications
- Other Name: Shield-Parking Brake Actuator Splash; Brake Dust Shield; Support Plate; Shield, Parking Brake Apply
- Position: Driver Side
- Replaces: 18022582
- Item Weight: 0.80 Pounds
- Item Dimensions: 14.5 x 13.7 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25990085
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
2003 Buick Regal Backing Plate, Passenger Side Part Number: 25990084
Product Specifications
- Other Name: Shield, Parking Brake Apply; Brake Dust Shield; Support Plate
- Position: Passenger Side
- Replaces: 18022583
- Item Weight: 0.80 Pounds
- Item Dimensions: 14.5 x 14.2 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25990084
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS

2003 Buick Regal Brake Backing Plate

With a comprehensive array of OEM 2003 Buick Regal Brake Backing Plate, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick Regal Brake Backing Plate are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick Regal Brake Backing Plate Parts and Q&A

Q: How to replace the brake backing plate on 2003 Buick Regal?
A: The process of replacing the Brake Backing Plate involves a vehicle being raised and suitably supported after which a tire and wheel assembly is removed, brake drum, and brake shoes removed. Next, you pull out universal spring and Wheel Cylinder, remove Parking Brake Cable from backing plate and Wheel Hub, and pull out rear Wheel Hub before finally taking out the backing plate. For installation remember to put the new backing plate first then the rear Wheel Hub and then reconnect Parking Brake Cable to the backing plate. Go on and install Wheel Cylinder, followed by universal spring, and brake shoes. Adjust the drum brakes, reinstall the Brake Drum, bleed the brake hydraulic system, and adjust the parking brake only to reinstall the tire and wheel assembly while lowering the vehicle.