How to Replace the Brake Light Switch in a Torque Converter Clutch/Cruise Control System on 2003 Buick LeSabre?

In order to change Torque Converter Clutch/Cruise Control Release Switch, remove left closeout insulator panel. Turn the upper switch anti-clockwise to disconnect it and disconnect the electrical connector. To install, make sure that the brake pedal is in the rest position, also reconnect the electrical connector and also reinstall the panel.

OEM 2003 Buick LeSabre Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2003 Buick LeSabre Brake Switch Part Number: 25668878
$13.94 MSRP: $20.75
You Save: $6.81 (33%)
Product Specifications
- Other Name: Switch, Stop Lamp Switch; Brake Light Switch; Release Switch; Stoplamp Switch; Switch; Switch, Transmission Safety Start/Warning; Switch, Cruise Control
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 2.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25668878
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2003 Buick LeSabre Brake Light Switch

With a comprehensive array of OEM 2003 Buick LeSabre Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick LeSabre Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick LeSabre Brake Light Switch Parts and Q&A

Q: How to Replace the Brake Light Switch in a Torque Converter Clutch/Cruise Control System on 2003 Buick LeSabre?
A: In order to change Torque Converter Clutch/Cruise Control Release Switch, remove left closeout insulator panel. Turn the upper switch anti-clockwise to disconnect it and disconnect the electrical connector. To install, make sure that the brake pedal is in the rest position, also reconnect the electrical connector and also reinstall the panel.