Other Name: Bushing, Back/Rear Window Glass Reveal; Hinge Bushing; Latch Kit, Latch, Side Door Window Glass, Body Side Rear Window, Striker, Door Lock Striker.
Position: Rear
Item Weight: 0.40 Pounds
Item Dimensions: 3.4 x 2.7 x 0.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 14047335
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2002 GMC Savana 3500 Submodels:
Base, LS, LT, SLE, SLT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
Other Name: Striker, Door Lock Striker; Striker, End Gate Lock
Position: Rear
Item Weight: 0.60 Pounds
Item Dimensions: 3.4 x 3.1 x 3.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 21090040
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2002 GMC Savana 3500 Submodels:
Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2002 GMC Savana 3500 Submodels:
Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
2002 GMC Savana 3500 Door Striker
With a comprehensive array of OEM 2002 GMC Savana 3500 Door Striker, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 GMC Savana 3500 Door Striker are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2002 GMC Savana 3500 Door Striker Parts and Q&A
Q: How to Replace the Lower Rear Door Striker on 2002 GMC Savana 3500?
A: A driver should start the replacement process by taking out the side door stepwell mat. The procedure starts by removing both bolts which hold the lower striker to the stepwell until you can take out the lower striker from the vehicle. Reinstall the lower striker on your vehicle position and use the Fastener Notice as a guideline for installation steps. Secure the lower striker to the stepwell through two bolts that should be tightened to 10 N.m (89 lb in). You need to put back the side door stepwell mat after finishing the installation steps.