How to replace the power mirror switch on 2002 Chevrolet Venture?

In order to substitute the rack and pinion, elevate the car and strip off tires. The tie rod ends and intermediate shaft should be disconnected, stabilizer shaft and power steering hoses should be removed. Press the crossmember, squeeze the spring of the coils, and take off the required bolts. Install new rack and pinion, reassemble parts and drop the car.

OEM 2002 Chevrolet Venture Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mirror Switch found

View related parts
2002 Chevrolet Venture Mirror Switch, Rear Passenger Side Part Number: 9009914
Product Specifications
- Other Name: Switch, Outside Rear View Mirror Remote Control; Power Mirror Switch; Switch, Rear View Mirror
- Position: Rear Passenger Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.2 x 2.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9009914
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2002 Chevrolet Venture Mirror Switch

With a comprehensive array of OEM 2002 Chevrolet Venture Mirror Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Venture Mirror Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Venture Mirror Switch Parts and Q&A

Q: How to replace the power mirror switch on 2002 Chevrolet Venture?
A: In order to substitute the rack and pinion, elevate the car and strip off tires. The tie rod ends and intermediate shaft should be disconnected, stabilizer shaft and power steering hoses should be removed. Press the crossmember, squeeze the spring of the coils, and take off the required bolts. Install new rack and pinion, reassemble parts and drop the car.