Other Name: Actuator Kit, Door Lock; Door Lock Actuator; Lock Actuator; Actuator; Actuator Kit, Door Electric And Vacuum Locks; Actuator Kit, Door And End Gate Electrical
Other Name: Actuator Kit, Door Lock; Trunk Lock Actuator Motor; Door Lock Actuator; Lock Actuator; Electric and Vacuum Door Locks; End Gate Electrical Actuator Kit.
Other Name: Lock Assembly-Rear Side Door Front; Door Lock Actuator Motor; Door Latch Assembly; Door Lock Actuator; Door Lock; Lock; Latch, Door Lock Remote Control; Latch, Door Lock Remote
Other Name: Lock Assembly-Rear Side Door Front; Door Lock Actuator Motor; Door Latch Assembly; Door Lock Actuator; Door Lock; Lock; Latch, Door Lock Remote Control; Latch, Door Lock Remote
Other Name: Lock Assembly-Rear Side Door Rear; Door Latch Assembly; Door Lock; Latch; Lock, Rear Side Door; Lock, Door Lock
Position: Rear Passenger Side
Replaces: 10321723, 16675908
Item Weight: 1.00 Pounds
Item Dimensions: 6.4 x 3.3 x 3.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 10347139
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
2002 Chevrolet Venture Door Lock Actuator
With a comprehensive array of OEM 2002 Chevrolet Venture Door Lock Actuator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Venture Door Lock Actuator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2002 Chevrolet Venture Door Lock Actuator Parts and Q&A
Q: How to replace the front door lock actuator on 2002 Chevrolet Venture?
A: Begin the replacement procedure of the front door lock actuator by removing the front door lock module. Begin by disconnecting the electrical connectors of the front door lock actuator before removing both the screws and bracket mounting the front door outside handle lock rod. After disassembling all components the front door lock actuator can be extracted from the front door lock. Instal the front door lock actuator inside position by replacing it to the front door lock before securing it with screws but note that they must be tightened to 2 N.m torque (18 lb in). The installation process starts with bracket installation of the front door outside handle lock rod followed by electrical connector reattachment and completion with front door lock module placement.