OEM 2002 Chevrolet S10 Ignition Coil

2002 Chevrolet S10 Ignition Coil Parts and Q&A

• Q: How to service and repair the ignition coil on 2002 Chevrolet S10?

  A: Begin by removing the air cleaner assembly's nut before disconnecting electrical connectors as well as the Distributor's Ignition Coil wire. Begin by removing the accelerator cable bracket followed by driving out the studs which maintain the bracket and Ignition Coil to the Intake Manifold before removing the bracket and Ignition Coil. The drill tool and punch job requires removal of both Ignition Coil retaining rivets before extracting the coil from the bracket. Use the 2 screws in the new Ignition Coil kit to attach the Ignition Coil to its bracket. Secure the Ignition Coil and bracket to the Intake Manifold through the studs then tighten each screw to 11 n.m (97 lb in). Securely place the accelerator control bracket while tightening the nuts and studs to 12 n.m (8.9 lb-ft). After checking that the wire can't touch the dip stick for long-term safety connect the Ignition Coil wire to resume operation then reinstall the air cleaner assembly with its nut in place.