How to replace the exhaust hanger on 2002 Chevrolet Impala?

The first step to replace the exhaust hanger includes vehicle lifting by using supports to stabilize both the exhaust system and the vehicle height. After removing the exhaust pipe rear hanger insulator from its bracket on the exhaust pipe rear hanger bracket you should proceed to detach the exhaust pipe rear hanger bolt and exhaust pipe rear hanger bracket. The replacement process starts with removing the exhaust pipe rear hanger insulators from the exhaust muffler rear hanger bracket before removing both the rear bumper impact bar bolt and the exhaust muffler rear hanger bracket. Installation of the exhaust muffler rear hanger bracket begins by adhering to the Fastener Notice in Service Precautions. Fasten together the rear bumper impact bar bolt while tightening it to 25 Nm (18 ft. lbs.). The installation sequence begins with affixing the exhaust pipe rear hanger insulators onto the exhaust muffler rear hanger bracket and continuing with the exhaust pipe rear hanger bracket and its bolt which requires tightening to 25 Nm (18 ft. lbs.). You must place the exhaust pipe rear hanger insulator on the exhaust pipe rear hanger bracket. Then remove the exhaust system support and check for any contact between the exhaust system and underbody before lowering the vehicle.

OEM 2002 Chevrolet Impala Exhaust Hanger

Exhaust Tail Pipe Hanger

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Exhaust Hangers found

View related parts
2002 Chevrolet Impala Converter & Pipe Insulator Part Number: 10056770
$20.17 MSRP: $30.01
You Save: $9.84 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hanger Assembly-Exhaust Muffler Intermediate; Exhaust Hanger; Muffler W/Tpipe Insulator; Converter & Pipe Hanger, Exhaust Muffler/Resonator, Catalytic Converter, Exhaust Pipe
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.9 x 2.9 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10056770
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
2002 Chevrolet Impala Muffler Insulator Part Number: 10231659
$14.55 MSRP: $21.66
You Save: $7.11 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Exhaust Pipe; Exhaust Insulator; Exhaust Hanger; Muffler W/Tpipe Insulator; Hanger; Exhaust Muffler/Resonator Insulator; Catalytic Converter Insulator
- Position: Rear
- Replaces: 10415755
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.6 x 3.2 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10231659
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- Base, LS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2002 Chevrolet Impala Mount Bracket, Passenger Side Part Number: 10328741
Product Specifications
- Other Name: Bracket, Exhaust Muffler/Resonator; Exhaust Bracket; Exhaust Hanger; Rear Bracket
- Position: Passenger Side
- Replaces: 10301945, 10287876
- Item Weight: 1.00 Pounds
- Item Dimensions: 8.0 x 5.3 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10328741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2002 Chevrolet Impala Mount Bracket Part Number: 10408323
Product Specifications
- Other Name: Bracket, Exhaust Muffler/Resonator; Exhaust Bracket; Exhaust Hanger; Front Bracket; Front Hanger; Muffler & Pipe Front Bracket; Muffler & Pipe Hanger; Hanger
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.8 x 3.0 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10408323
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2002 Chevrolet Impala Mount Bracket, Rear Part Number: 10301948
$1.68 MSRP: $2.50
You Save: $0.82 (33%)
Product Specifications
- Other Name: Bracket-Exhaust Pipe Rear Hanger; Exhaust Bracket; Exhaust Hanger; Center Bracket; Muffler & Pipe Hanger; Exhaust Pipe Bracket
- Position: Rear
- Replaces: 10245300, 10424555
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.7 x 2.6 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10301948
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2002 Chevrolet Impala Exhaust Hanger

With a comprehensive array of OEM 2002 Chevrolet Impala Exhaust Hanger, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Impala Exhaust Hanger are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Impala Exhaust Hanger Parts and Q&A

Q: How to replace the exhaust hanger on 2002 Chevrolet Impala?
A: The first step to replace the exhaust hanger includes vehicle lifting by using supports to stabilize both the exhaust system and the vehicle height. After removing the exhaust pipe rear hanger insulator from its bracket on the exhaust pipe rear hanger bracket you should proceed to detach the exhaust pipe rear hanger bolt and exhaust pipe rear hanger bracket. The replacement process starts with removing the exhaust pipe rear hanger insulators from the exhaust muffler rear hanger bracket before removing both the rear bumper impact bar bolt and the exhaust muffler rear hanger bracket. Installation of the exhaust muffler rear hanger bracket begins by adhering to the Fastener Notice in Service Precautions. Fasten together the rear bumper impact bar bolt while tightening it to 25 Nm (18 ft. lbs.). The installation sequence begins with affixing the exhaust pipe rear hanger insulators onto the exhaust muffler rear hanger bracket and continuing with the exhaust pipe rear hanger bracket and its bolt which requires tightening to 25 Nm (18 ft. lbs.). You must place the exhaust pipe rear hanger insulator on the exhaust pipe rear hanger bracket. Then remove the exhaust system support and check for any contact between the exhaust system and underbody before lowering the vehicle.