How to Replace the Shift Linkage Boot on 2002 Chevrolet Camaro?

The replacement of the shift control closeout boot starts by removing the bolts securing the front floor console and control closeout boot before extracting the shift control closeout boot. After installation of the new shift control closeout boot users must first refer to the Fastener Notice in Service Precautions before tightening the shift control closeout boot bolts to 2 Nm (18 inch lbs.). Finishing up the procedure requires reattachment of the front floor console trim plate.

OEM 2002 Chevrolet Camaro Shift Linkage Boot

Shift Linkage Dust Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Shift Linkage Boot found

View related parts
2002 Chevrolet Camaro Shift Boot Part Number: 10306417
Product Specifications
- Other Name: Boot, Transmission Control Lever; Boot
- Replaces: 10271369
- Item Weight: 0.50 Pounds
- Item Dimensions: 7.4 x 7.4 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10306417
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, RS, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

2002 Chevrolet Camaro Shift Linkage Boot

With a comprehensive array of OEM 2002 Chevrolet Camaro Shift Linkage Boot, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Camaro Shift Linkage Boot are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Camaro Shift Linkage Boot Parts and Q&A

Q: How to Replace the Shift Linkage Boot on 2002 Chevrolet Camaro?
A: The replacement of the shift control closeout boot starts by removing the bolts securing the front floor console and control closeout boot before extracting the shift control closeout boot. After installation of the new shift control closeout boot users must first refer to the Fastener Notice in Service Precautions before tightening the shift control closeout boot bolts to 2 Nm (18 inch lbs.). Finishing up the procedure requires reattachment of the front floor console trim plate.