OEM 2002 Chevrolet Camaro Oil Filter

2002 Chevrolet Camaro Oil Filter Parts and Q&A

• Q: How to replace the engine oil and oil filter on 2002 Chevrolet Camaro?

  A: To change the engine oil and Oil Filter, firstly, raise and support the vehicle the properly. Place the oil drain pan underneath the engine oil Drain Plug, also remove the plug and clean or replace with the need condition. Examine the sealing surface on the Oil Pan and replace it if necessary. Next, you should remove the Oil Filter and ensure that the sealing area on Oil Filter adapter is clean and change the adapter if it is necessary. Slighly oil the new Oil Filter gasket with clean engine oil and install the new engine Oil Filter, then tighten it to a 3/4 to 1 full turn on the gasket contacting the mounting surface. To install the engine oil Drain Plug, tighten to 30 nm (22 ft. Lbs.) and then remove it along with the oil drain pan and lower the vehicle. Put on fresh engine oil, start the engine, and confirm if there are any oil leaks. Insufficient mapping, insufficient margins can lead to inflationary pressures that are, quite clearly, beyond the control of the existing system. Take off the oil level indicator from the tube, clean the indicator end with a disposable paper towel or cloth, and return it to the tube until the handle reaches the top of the tube. Take away the oil level indicator, again with the tip tilted, and verify the oil level and add or remove oil to the ideal level.