How to replace the wheel cylinder on 2002 Chevrolet Astro?

First to replace the Wheel Cylinder, then brake shoes than brake pipe and finally take out the Wheel Cylinder bolts before taking out the Wheel Cylinder. For installation, start with the installation of the Wheel Cylinder, following the fastener notice into service precautions. Next, install the Wheel Cylinder bolts and tighten them up to 18 nm (13 ft. Lbs.). Attach the brake pipe to the Wheel Cylinder and secure the brake pipe fitting to 17 nm (13 ft. Lbs.) lastly, fit back the brake shoes and bleed the brake system.

OEM 2002 Chevrolet Astro Wheel Cylinder

Brake Wheel Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Cylinder found

View related parts
2002 Chevrolet Astro Wheel Cylinder, Rear Part Number: 19213356
$51.34 MSRP: $96.44
You Save: $45.10 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Rear Brake; Wheel Cylinder Repair Kit; Cylinder, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 18015812, 18060118
- Item Weight: 1.40 Pounds
- Item Dimensions: 3.5 x 4.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19213356
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Astro Submodels:
- Base, CL, CS, LS, LT | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS

2002 Chevrolet Astro Wheel Cylinder

With a comprehensive array of OEM 2002 Chevrolet Astro Wheel Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Astro Wheel Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Astro Wheel Cylinder Parts and Q&A

Q: How to replace the wheel cylinder on 2002 Chevrolet Astro?
A: First to replace the Wheel Cylinder, then brake shoes than brake pipe and finally take out the Wheel Cylinder bolts before taking out the Wheel Cylinder. For installation, start with the installation of the Wheel Cylinder, following the fastener notice into service precautions. Next, install the Wheel Cylinder bolts and tighten them up to 18 nm (13 ft. Lbs.). Attach the brake pipe to the Wheel Cylinder and secure the brake pipe fitting to 17 nm (13 ft. Lbs.) lastly, fit back the brake shoes and bleed the brake system.