How to replace the engine oil pressure switch on 2002 Cadillac Escalade?

In order to install the engine oil pressure switch, the engine sight shield may have to be removed. Unscrew the electrical connector and unscrew the switch with the Oil Pressure Switch Socket. Seal the threads of the new switch with a sealant, fit it, screw it and reconnect the electrical connector. Install a sight shield, where needed.

OEM 2002 Cadillac Escalade Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2002 Cadillac Escalade Oil Pressure Sending Unit Part Number: 19244505
$97.15 MSRP: $165.40
You Save: $68.25 (42%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Engine Oil Pressure/Temperature; Oil Pressure Switch
- Replaces: 12562267
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.3 x 2.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19244505
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac Escalade Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2002 Cadillac Escalade Oil Pressure Switch

With a comprehensive array of OEM 2002 Cadillac Escalade Oil Pressure Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Cadillac Escalade Oil Pressure Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Cadillac Escalade Oil Pressure Switch Parts and Q&A

Q: How to replace the engine oil pressure switch on 2002 Cadillac Escalade?
A: In order to install the engine oil pressure switch, the engine sight shield may have to be removed. Unscrew the electrical connector and unscrew the switch with the Oil Pressure Switch Socket. Seal the threads of the new switch with a sealant, fit it, screw it and reconnect the electrical connector. Install a sight shield, where needed.