How to Service and Repair the Rear Sway Bar Bushing on 2001 Chevrolet Prizm?

The vehicle needs raising open before starting Sway Bar Bushing service and repair work. Begin by removing the 2 bolts holding the sway bar shaft insulator clamp and then take off the insulator clamp from the insulator before extracting the insulator from the sway bar shaft. Payment of the insulator should begin by applying it to the sway bar shaft while the vehicle weight remains on the tires and wheels before proceeding to tighten the bolts. Fasten the insulator clamp to the vehicle using the 2 bolts but do not fully tighten them at this time. Begin by lowering the vehicle after which you should position it on a drive-on lift or alignment rack. Apply 3 pressing pushes on the rear Bumper to stabilize the suspension system. Close off the installation by tightening bolts on the insulator clamp while fastening it to the vehicle until they achieve 19 nm (14 ft. Lbs.) torque.

OEM 2001 Chevrolet Prizm Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Bushings found

View related parts
2001 Chevrolet Prizm Stabilizer Bar Bushing Part Number: 94857945
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Cover Bolt
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.6 x 1.6 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 94857945
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS
View related parts
2001 Chevrolet Prizm Stabilizer Bar Bushing Part Number: 94855163
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.5 x 1.4 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 94855163
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS
View related parts
2001 Chevrolet Prizm Insulator Part Number: 94857925
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.1 x 2.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 94857925
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS

2001 Chevrolet Prizm Sway Bar Bushing

With a comprehensive array of OEM 2001 Chevrolet Prizm Sway Bar Bushing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Prizm Sway Bar Bushing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Prizm Sway Bar Bushing Parts and Q&A

Q: How to Service and Repair the Rear Sway Bar Bushing on 2001 Chevrolet Prizm?
A: The vehicle needs raising open before starting Sway Bar Bushing service and repair work. Begin by removing the 2 bolts holding the sway bar shaft insulator clamp and then take off the insulator clamp from the insulator before extracting the insulator from the sway bar shaft. Payment of the insulator should begin by applying it to the sway bar shaft while the vehicle weight remains on the tires and wheels before proceeding to tighten the bolts. Fasten the insulator clamp to the vehicle using the 2 bolts but do not fully tighten them at this time. Begin by lowering the vehicle after which you should position it on a drive-on lift or alignment rack. Apply 3 pressing pushes on the rear Bumper to stabilize the suspension system. Close off the installation by tightening bolts on the insulator clamp while fastening it to the vehicle until they achieve 19 nm (14 ft. Lbs.) torque.