How to replace the rear bumper fascia on 2001 Chevrolet Prizm?

In order to change the rear bumper fascia, open the rear compartment lid and take away the trim panels and sill trim plate. You will have to detach the license plate lamps, then get the securing nuts and retainers. Unzip the fascia, place the new one in and put the bits back together to close the top.

OEM 2001 Chevrolet Prizm Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Bumpers found

View related parts
2001 Chevrolet Prizm Bumper Cover Part Number: 94857148
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Item Weight: 15.40 Pounds
- Item Dimensions: 74.4 x 34.1 x 17.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 94857148
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS
View related parts
2001 Chevrolet Prizm Bumper Cover Part Number: 94857165
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Item Weight: 11.70 Pounds
- Item Dimensions: 72.1 x 28.8 x 18.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 94857165
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS

2001 Chevrolet Prizm Bumper

With a comprehensive array of OEM 2001 Chevrolet Prizm Bumper, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Prizm Bumper are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Prizm Bumper Parts and Q&A

Q: How to replace the rear bumper fascia on 2001 Chevrolet Prizm?
A: In order to change the rear bumper fascia, open the rear compartment lid and take away the trim panels and sill trim plate. You will have to detach the license plate lamps, then get the securing nuts and retainers. Unzip the fascia, place the new one in and put the bits back together to close the top.