OEM 2001 Chevrolet Malibu Fuel Injector

2001 Chevrolet Malibu Fuel Injector Parts and Q&A

• Q: How to replace a fuel injector on 2001 Chevrolet Malibu?

  A: The first step when replacing fuel injectors requires draining the fuel system pressure. You should start by removing the Fuel Rail then unclipping the retaining clips before taking out the fuel injectors from the rail. You must detach both Fuel Injector O-Ring components starting with the upper segment followed by the lower segment. The process of new injector installation requires proper flow rate calibration for each component while selecting the appropriate part number. Position the Fuel Injector upper o-ring along with the lower o-ring while carefully placing the brown o-ring at the bottom followed by using an o-ring back up for correct o-ring positioning on the Fuel Injector. Install the Fuel Injector onto the Fuel Rail after which the retaining clips must be used to secure it. Fasten the Fuel Rail back into place before closing the fuel filler cap securely. Check for fuel leaks by turning on the ignition for two seconds followed by waiting ten seconds with the ignition off then recheck for any fluid drippage upon turning on the ignition.