How to replace the rear wheel speed sensor on 2001 Chevrolet Lumina?

For Wheel Speed Sensor replacement put the vehicle on a suitable hoist at the appropriate height and take out the rear tire and wheel unit. Accessible next to the rear strut sits the rear Wheel Speed Sensor electrical connection. You must remove it. Take out the hub and bearing set since speed sensors and rings are built into the components which need to be replaced together. Place the hub and bearing assembly on the vehicle and restore the rear Wheel Speed Sensor connections before putting back the wheel tires. Put the car on its lowest position then place the ignition switch to on with no engine power before doing the system test.

OEM 2001 Chevrolet Lumina Wheel Speed Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Speed Sensor found

View related parts
2001 Chevrolet Lumina ABS Sensor Part Number: 10456116
$31.40 MSRP: $99.56
You Save: $68.16 (69%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Electronic Brake Control; ABS Wheel Speed Sensor; Speed Sensor; Harness
- Replaces: 10472134
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.7 x 4.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456116
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Lumina Submodels:
- Base, Euro, LS, LTZ, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2001 Chevrolet Lumina Wheel Speed Sensor

With a comprehensive array of OEM 2001 Chevrolet Lumina Wheel Speed Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Lumina Wheel Speed Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Lumina Wheel Speed Sensor Parts and Q&A

Q: How to replace the rear wheel speed sensor on 2001 Chevrolet Lumina?
A: For Wheel Speed Sensor replacement put the vehicle on a suitable hoist at the appropriate height and take out the rear tire and wheel unit. Accessible next to the rear strut sits the rear Wheel Speed Sensor electrical connection. You must remove it. Take out the hub and bearing set since speed sensors and rings are built into the components which need to be replaced together. Place the hub and bearing assembly on the vehicle and restore the rear Wheel Speed Sensor connections before putting back the wheel tires. Put the car on its lowest position then place the ignition switch to on with no engine power before doing the system test.