How to Service Canister Purge Valves on 2001 Chevrolet Lumina?

When servicing the Evap Canister Purge Valves, one should willfully cut off the ignition switch and mark the position of the EVAP hose. Disconnect electrical connector and hoses and take out the valve and then again place it on the manifold. Tighten with the bolt and re-assemble the electrical connector and the hoses.

OEM 2001 Chevrolet Lumina Canister Purge Valves

Fuel Tank Evaporator Purge Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valves found

View related parts
2001 Chevrolet Lumina Purge Valve Part Number: 1997297
Product Specifications
- Other Name: Valve Assembly-Evaporator Emission Canister Purge Solenoid; Vapor Canister Vent Solenoid.; Purge Solenoid; Vapor Canister; Purge Control Valve; Valve, Fuel Tank Evaporator/Purge Control
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1997297
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Lumina Submodels:
- Base | 6 Cyl 3.1 L GAS

2001 Chevrolet Lumina Canister Purge Valves

With a comprehensive array of OEM 2001 Chevrolet Lumina Canister Purge Valves, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Lumina Canister Purge Valves are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Lumina Canister Purge Valves Parts and Q&A

Q: How to Service Canister Purge Valves on 2001 Chevrolet Lumina?
A: When servicing the Evap Canister Purge Valves, one should willfully cut off the ignition switch and mark the position of the EVAP hose. Disconnect electrical connector and hoses and take out the valve and then again place it on the manifold. Tighten with the bolt and re-assemble the electrical connector and the hoses.