How to service the brake light switch on 2001 Chevrolet Lumina?

To maintain the brake light switch, take off the insulator of the driver side instrument panel, unconnect the electrical connectors and the stoplamp switch. To install it, re-install the switch, reconnect the connectors, and re-position the switch, as required, and then re-fit the instrument panel insulator.

OEM 2001 Chevrolet Lumina Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2001 Chevrolet Lumina Brake Switch Part Number: 12450023
$10.05 MSRP: $18.88
You Save: $8.83 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Stop Lamp; Brake Light Switch; Release Switch; Stoplamp Switch; Switch, Transmission Converter; Switch, Stop Lamp Switch
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.3 x 2.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12450023
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Lumina Submodels:
- Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2001 Chevrolet Lumina Brake Light Switch

With a comprehensive array of OEM 2001 Chevrolet Lumina Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Lumina Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Lumina Brake Light Switch Parts and Q&A

Q: How to service the brake light switch on 2001 Chevrolet Lumina?
A: To maintain the brake light switch, take off the insulator of the driver side instrument panel, unconnect the electrical connectors and the stoplamp switch. To install it, re-install the switch, reconnect the connectors, and re-position the switch, as required, and then re-fit the instrument panel insulator.