How to replace the Rack and Pinion Boot on 2001 Chevrolet Camaro?

In order to remove the rack and pinion boot, the J 22610 Service Boot Clamp Installer is used to dismount the outer tie rod and the hex jam nut. Unscrew the boot and check to see whether it is damaged or oily. Wipe the boot, replace the clamp and re-fit the components properly before reassembling the components.

OEM 2001 Chevrolet Camaro Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack and Pinion Boot found

View related parts
2001 Chevrolet Camaro Tie Rod Boot Part Number: 21011025
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder; Rack and Pinion Bellows Kit; Rack & Pinion Boot.; Inner Tie Rod Boot; Boot Kit; Boot; Boot Kit, Tie Rod End Dust
- Item Weight: 0.80 Pounds
- Item Dimensions: 12.0 x 4.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21011025
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Camaro Submodels:
- Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

2001 Chevrolet Camaro Rack and Pinion Boot

With a comprehensive array of OEM 2001 Chevrolet Camaro Rack and Pinion Boot, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Camaro Rack and Pinion Boot are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Camaro Rack and Pinion Boot Parts and Q&A

Q: How to replace the Rack and Pinion Boot on 2001 Chevrolet Camaro?
A: In order to remove the rack and pinion boot, the J 22610 Service Boot Clamp Installer is used to dismount the outer tie rod and the hex jam nut. Unscrew the boot and check to see whether it is damaged or oily. Wipe the boot, replace the clamp and re-fit the components properly before reassembling the components.