How to replace the power door lock switch on 2001 Cadillac DeVille?

To change the Power Door Lock Switch, first take off the door panel following the directions for either the Rear Side Door or the Front Side Door Trim Panel replacement. After that, remove the electrical connector from the lock switch. With a flat tool, pop open the locking tabs (1) on the front and back of the switch and then remove the lock switch. The new switch should be snapped into the door trim panel, the electrical connector should be attached and the door trim panel should then be installed correctly following the repair manual.

OEM 2001 Cadillac DeVille Door Lock Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Door Lock Switch found

View related parts
2001 Cadillac DeVille Lock Switch Part Number: 19259953
Product Specifications
- Other Name: Switch, Door Electric And Vacuum Locks; Door Lock Switch
- Replaces: 25664000
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.5 x 2.0 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19259953
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS

2001 Cadillac DeVille Door Lock Switch

With a comprehensive array of OEM 2001 Cadillac DeVille Door Lock Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Cadillac DeVille Door Lock Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Cadillac DeVille Door Lock Switch Parts and Q&A

Q: How to replace the power door lock switch on 2001 Cadillac DeVille?
A: To change the Power Door Lock Switch, first take off the door panel following the directions for either the Rear Side Door or the Front Side Door Trim Panel replacement. After that, remove the electrical connector from the lock switch. With a flat tool, pop open the locking tabs (1) on the front and back of the switch and then remove the lock switch. The new switch should be snapped into the door trim panel, the electrical connector should be attached and the door trim panel should then be installed correctly following the repair manual.