How to replace the Hazard Warning Switch and Turn Signal Switch on 2001 Buick Park Avenue?

In order to swap the multifunction, turn signal, and hazard switch use the disable button of the SIR system. Take out the steering column trim covers, the multifunction switch retaining screws and release the electrical connections. Installation of the new switch should be done, screws tightened, the electrical connections reconnected and trim covers attached again, then the SIR system can be enabled.

OEM 2001 Buick Park Avenue Hazard Warning Switch

Hazard Warning Emergency Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hazard Warning Switch found

View related parts
2001 Buick Park Avenue Release Switch Part Number: 25630058
Product Specifications
- Other Name: Switch, Fuel Tank Filler; Fuel Door Release Switch; Switch; Switch, Rear Compartment Lid Release Or Ajar; Switch, Fuel Tank Filler Door
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.4 x 1.7 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25630058
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2001 Buick Park Avenue Hazard Warning Switch

With a comprehensive array of OEM 2001 Buick Park Avenue Hazard Warning Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick Park Avenue Hazard Warning Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Buick Park Avenue Hazard Warning Switch Parts and Q&A

Q: How to replace the Hazard Warning Switch and Turn Signal Switch on 2001 Buick Park Avenue?
A: In order to swap the multifunction, turn signal, and hazard switch use the disable button of the SIR system. Take out the steering column trim covers, the multifunction switch retaining screws and release the electrical connections. Installation of the new switch should be done, screws tightened, the electrical connections reconnected and trim covers attached again, then the SIR system can be enabled.