OEM 2001 Buick LeSabre Shift Cable

2001 Buick LeSabre Shift Cable Parts and Q&A

• Q: How to replace the automatic transmission shift cable on 2001 Buick LeSabre?

  A: The automatic transaxle range selector cable needs a flat-bladed tool to detach its retaining clip before cable replacement by removing the throttle body air inlet duct first. A large flat-bladed tool should be used first to free the cable from the cable lever before pliers lower the cable retainers to remove it. Begin cable removal by removing the cable first from the bracket of the automatic transaxle range selector and second from the left IP closeout panel. Finally remove the retaining clip from the cable. Push the cable through the cowl hole after separating it from the column control lever and steering column bracket. The installation process requires directing the automatic transaxle range selector cable properly through the engine compartment before inserting it through the cowl. The installation of the cable begins with attaching it to the steering column bracket while using the retaining clip to keep it in place until connecting it to the column control lever. You should put back the left IP closeout panel while connecting the automatic transaxle range selector cable to its bracket alongside the automatic transaxle range selector lever and locking it in place with another retaining clip. To finish the cable installation you need to adjust the cable before putting back the throttle body air inlet duct.