How to replace the wheel cylinder on 2000 GMC Safari?

Firstly remove the brake shoes, then remove the brake pipe and the bolts in order to remove the Wheel Cylinder. For installation, start with installing a new Wheel Cylinder; make sure to install it according to the fastener notice of service precautions. After that,topromise, install the bolts and tighten them possessive to 18 nm (13 ft lbs.). Connect the brake pipe to the Wheel Cylinder and tighten the brake pipe fitting to 17 nm (13 ft lbs). Finally, refit the brake shoes and bleed the brake system.

OEM 2000 GMC Safari Wheel Cylinder

Brake Wheel Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Cylinder found

View related parts
2000 GMC Safari Wheel Cylinder, Rear Part Number: 19213356
$51.34 MSRP: $96.44
You Save: $45.10 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Rear Brake; Wheel Cylinder Repair Kit; Cylinder, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 18015812, 18060118
- Item Weight: 1.40 Pounds
- Item Dimensions: 3.5 x 4.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19213356
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Safari Submodels:
- Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS

2000 GMC Safari Wheel Cylinder

With a comprehensive array of OEM 2000 GMC Safari Wheel Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 GMC Safari Wheel Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 GMC Safari Wheel Cylinder Parts and Q&A

Q: How to replace the wheel cylinder on 2000 GMC Safari?
A: Firstly remove the brake shoes, then remove the brake pipe and the bolts in order to remove the Wheel Cylinder. For installation, start with installing a new Wheel Cylinder; make sure to install it according to the fastener notice of service precautions. After that,topromise, install the bolts and tighten them possessive to 18 nm (13 ft lbs.). Connect the brake pipe to the Wheel Cylinder and tighten the brake pipe fitting to 17 nm (13 ft lbs). Finally, refit the brake shoes and bleed the brake system.