How to service and repair the Oil Pressure Switch on 2000 Chevrolet Tahoe?

In order to service and repair the oil pressure sensor, first of all, the engine sight shield has to be removed and clean the space around the sensor. Disconnect the electric connector and take away the sensor with a suitable tool. Seal the threads, put in place the sensor, reconnect electrical connector and reinstall engine sight shield.

OEM 2000 Chevrolet Tahoe Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2000 Chevrolet Tahoe Oil Pressure Sending Unit Part Number: 19244505
$97.15 MSRP: $165.40
You Save: $68.25 (42%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Engine Oil Pressure/Temperature; Oil Pressure Switch
- Replaces: 12562267
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.3 x 2.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19244505
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Tahoe Submodels:
- Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

2000 Chevrolet Tahoe Oil Pressure Switch

With a comprehensive array of OEM 2000 Chevrolet Tahoe Oil Pressure Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Tahoe Oil Pressure Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Tahoe Oil Pressure Switch Parts and Q&A

Q: How to service and repair the Oil Pressure Switch on 2000 Chevrolet Tahoe?
A: In order to service and repair the oil pressure sensor, first of all, the engine sight shield has to be removed and clean the space around the sensor. Disconnect the electric connector and take away the sensor with a suitable tool. Seal the threads, put in place the sensor, reconnect electrical connector and reinstall engine sight shield.