OEM 2000 Chevrolet Suburban 1500 Intake Manifold

2000 Chevrolet Suburban 1500 Intake Manifold Parts and Q&A

• Q: How to remove the intake manifold, throttle body, fuel injection rail, and fuel injectors as an assembly on 2000 Chevrolet Suburban 1500?

  A: The initial step before removing the Intake Manifold and Throttle Body with fuel injection rail and fuel injectors as one piece starts by disconnecting positive crankcase ventilation (PCV) hose and valve. Remove the manifold absolute pressure (MAP) sensor only when required. Begin by first removing the clamps holding the engine coolant air bleed hose near the Throttle Body then proceed with removal of the accelerator control cable bracket together with any necessary bolts. Third remove the evaporative emission (EVAP) solenoid and its bolt to remove the isolator. Begin by removing the bolts securing the Intake Manifold and separate both the manifold and gaskets. The technician should separate the Intake Manifold-to-cylinder head gaskets from their position at the manifold then discard the Intake Manifold gaskets while preventing their use elsewhere.