Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/Lever); Multi Purpose Combination Switch; Turn/Wiper Lever; Switch, Windshield Wiper Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
Replaces: 26093873, 26073612, 26085930
Item Weight: 1.40 Pounds
Item Dimensions: 11.1 x 6.4 x 6.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 88964580
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/Lever); Multi Purpose Combination Switch; Turn/Wiper Lever; Switch, Windshield Wiper Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
Replaces: 26073613, 26093874, 26085931
Item Weight: 2.30 Pounds
Item Dimensions: 10.8 x 6.6 x 4.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 88964581
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
2000 Chevrolet Monte Carlo Turn Signal Switch
With a comprehensive array of OEM 2000 Chevrolet Monte Carlo Turn Signal Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Monte Carlo Turn Signal Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2000 Chevrolet Monte Carlo Turn Signal Switch Parts and Q&A
Q: How to remove and install the Turn Signal Switch on 2000 Chevrolet Monte Carlo?
A: In order to remove the multifunction turn signal lever, make sure that such lever is in the OFF position and disconnects the negative battery cable. Switch of SIR system, and then take out steering wheel and trim covers. Unscrew the harnesses and unscrew the lever and insert the new one. Re-connect all and make sure the lever is in place.