OEM 2000 Chevrolet Metro Alternator

2000 Chevrolet Metro Alternator Parts and Q&A

• Q: How to replace the alternator on 2000 Chevrolet Metro?

  A: The generator replacement requires beginning with disconnecting the negative Battery Cable to prevent severe injuries that could result from tool shorts at the generator lead. You should first take out the air cleaner assembly then remove the rubber insulator, the nut and the electrical connector from generator b+ terminal. The generator becomes removable once the upper mounting bolt and Drive Belt lose their place before extracting the two lower generator mounting bolts. To install the generator place it back onto the vehicle first before tightening the lower bolts and then finish by leaving the upper bolt loose. For used belts set the desired deflection between 6-8 mm (0.24-0.31 in) while new belts need adjustments between 5-7 mm (0.20-0.27 in) during belt installation across the pulleys by applying 10 kg (22 lb) weight. Apply 23 n.m (17 lb ft) of torque when you finish adjusting the generator mounting bolts. Secure the electrical connector over the generator b+ terminal using the provided nut along with a rubber insulator before locking the connector nut with a torque of 8 n.m (71 lb in). Put everything back for the air cleaner assembly before reconnecting the negative Battery Cable and fastening it to 15 n.m (11 lb in).