How to service and repair a dimmer switch on 2000 Chevrolet Malibu?

To work on the dimmer switch, turn the SIR system off. Unsnap the switch from the trim plate and disconnect the electrical connector. Remove the socket and bulb assembly if necessary. For installation, once again connect the electrical connector, install the new bulb and socket and then reconnect and activate the switch and the SIR system.

OEM 2000 Chevrolet Malibu Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Dimmer Switch found

View related parts
2000 Chevrolet Malibu Multifunction Switch Part Number: 19244094
$21.57 MSRP: $32.11
You Save: $10.54 (33%)
Product Specifications
- Other Name: Switch Assembly, Turn Signal, Headlamp, Wiper & Washer; Multi Purpose Combination Switch; Switch, Headlamp/Fog Lamp/Turn Signal; Windshield Wiper Control; Turn Signal Lamp; Headlamp Dimmer
- Replaces: 22661036, 22602262, 22676853
- Item Weight: 0.90 Pounds
- Item Dimensions: 18.4 x 7.9 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19244094
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Malibu Submodels:
- Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS

2000 Chevrolet Malibu Dimmer Switch

With a comprehensive array of OEM 2000 Chevrolet Malibu Dimmer Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Malibu Dimmer Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Malibu Dimmer Switch Parts and Q&A

Q: How to service and repair a dimmer switch on 2000 Chevrolet Malibu?
A: To work on the dimmer switch, turn the SIR system off. Unsnap the switch from the trim plate and disconnect the electrical connector. Remove the socket and bulb assembly if necessary. For installation, once again connect the electrical connector, install the new bulb and socket and then reconnect and activate the switch and the SIR system.