Other Name: Handle; Interior Door Handle; Handle, Door Lock Inside Handle
Position: Passenger Side
Condition: New
Fitment Type: Direct Replacement
SKU: 10269048
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following 2000 Chevrolet Lumina Submodels:
Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
2000 Chevrolet Lumina Door Handle
With a comprehensive array of OEM 2000 Chevrolet Lumina Door Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Lumina Door Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2000 Chevrolet Lumina Door Handle Parts and Q&A
Q: How to replace the rear side inner door handle on 2000 Chevrolet Lumina?
A: The first step to replace the rear side door inside handle requires trimming panel and water deflector removal while prioritizing safe shop practices that include eye protection. During mandrel removal always sustain support to the back side of the rivet to prevent metal bending. Drill out the door handle rivet using a 6.35 mm (1/4 in) drill bit after you remove its mandrel with a center punch. Detach the inside door handle and separate the inside lock rod and inside handle rod from the inside door handle one after another. To install the inside handle rod you must fasten it properly to the inside door handle using a clip. Affix the inside lock rod using a clip after connecting it. Position the inner door handle inside the entrance while letting the tabs enter the door metal openings before installing the rivet. Reinstall the water deflector together with the trim panel.