How to replace the Vehicle Speed Sensor in a vehicle on 2000 Chevrolet K3500?

Before working on the Vehicle Speed Sensor, you should raise the vehicle. After that, disconnect the wiring harness connector and remove the bolt holding the speed sensor to the transmission and take out the speed sensor. Should the 0-ring seal be connected to the speed sensor, please take it off. Before installation, lubricate the seal with GM P/N 12346143 transmission fluid and put it and the sensor in their proper location. Secure the bolt to 11 Nm (97 inch lbs.) and next link the wiring harness connector back up. In addition, check the transmission fluid for any obvious issues.

OEM 2000 Chevrolet K3500 Vehicle Speed Sensor

VSS

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vehicle Speed Sensor found

View related parts
2000 Chevrolet K3500 Vehicle Speed Sensor Part Number: 15546837
$39.49 MSRP: $95.21
You Save: $55.72 (59%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Speed Sensor; Sensor, Emission Control Sensor(Oxygen); Sensor, Speedometer Drive
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 3.0 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15546837
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet K3500 Submodels:
- Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS

2000 Chevrolet K3500 Vehicle Speed Sensor

With a comprehensive array of OEM 2000 Chevrolet K3500 Vehicle Speed Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet K3500 Vehicle Speed Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet K3500 Vehicle Speed Sensor Parts and Q&A

Q: How to replace the Vehicle Speed Sensor in a vehicle on 2000 Chevrolet K3500?
A: Before working on the Vehicle Speed Sensor, you should raise the vehicle. After that, disconnect the wiring harness connector and remove the bolt holding the speed sensor to the transmission and take out the speed sensor. Should the 0-ring seal be connected to the speed sensor, please take it off. Before installation, lubricate the seal with GM P/N 12346143 transmission fluid and put it and the sensor in their proper location. Secure the bolt to 11 Nm (97 inch lbs.) and next link the wiring harness connector back up. In addition, check the transmission fluid for any obvious issues.