OEM 2000 Chevrolet Corvette Fuel Injector

2000 Chevrolet Corvette Fuel Injector Parts and Q&A

• Q: What tools are required to service and repair the fuel injector on 2000 Chevrolet Corvette?

  A: Recipients of Fuel Injector service and repair must obtain a fuel pressure gauge (J 34730-1A) along with its tool set combined with the fuel line quick connect separator (J 37088-A). Start the repair by removing the connector which leads to the negative battery terminal. The service requires one to reduce fuel system pressure while unmounting the Fuel Rail assembly before both connector pins and nozzles get damaged. A spread operation on the injector retainer clip frees the component from the Fuel Rail before removing the Fuel Injector while discarding the clip. Discard both o-ring seals from the ends of the injector because you will remove them from their housing. Choose the appropriate Fuel Injector during purchase while checking the stampings on the assembly for part number and plant number along with manufacturing date and week code. Place engine oil on the new injector o-ring seals before putting them on the injector and then add a new retainer clip. Relocate the Fuel Injector into the Fuel Rail injector socket and orientate its electrical connector towards the outside while installing the Fuel Rail system followed by fuel filler cap tightening. An inspection for leaks should be performed by first turning the Ignition Switch on for 2 seconds then off for 10 seconds and finally turning it on again while checking for fuel leaks. Next, reconnect the negative Battery Cable. End the procedure by setting up transmitters followed by an idle learn operation.