OEM 2000 Chevrolet Corvette Fan Motor

2000 Chevrolet Corvette Fan Motor Parts and Q&A

• Q: How to service the radiator cooling fan motor on 2000 Chevrolet Corvette?

  A: The first step to service the radiator cooling Fan Motor is to lift and support the vehicle. First drop the front stabilizer shaft by removing its bolts before hanging the shaft downward. The radiator cooling fan service demands disconnecting the motor connectors first followed by disconnecting the wiring harness from the Fan Shroud then detaching the lower Radiator Hose. Start by removing the Fan Shroud from the radiator followed by taking off the fan from the motor and the Fan Motor from the shroud. Secure the Fan Motor to its shroud through screw tightening reaching 6 nm (53 inch lbs.). Afterward, install the fan into the motor while fastening it using a fan retaining nut set to 5.5 nm (49 inch lbs.). The technician reattaches the Fan Shroud to the radiator then plugs in the Fan Motor connectors while placing the wiring harness on the fan shrouds before moving to the next steps. Reposition the front stabilizer shaft to the crossmember before installing the front stabilizer insulator clamp bolts which need to be tightened to 58 nm (43 ft. Lbs.). Finally, lower the vehicle.