How to remove and install the power mirror switch on 2000 Chevrolet Camaro?

In order to install the power mirror switch, cushion the trim panel with rag and pry off the switches. Slide them to unscrew them off the door trim panel. Unconnect the electrical connector and take out the switch. To install the electrical connector, reconnect the connector and reinsert the switches into the panel.

OEM 2000 Chevrolet Camaro Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mirror Switch found

View related parts
2000 Chevrolet Camaro Switch Assembly, Rear Part Number: 10195585
Product Specifications
- Other Name: Switch Assembly-Outside Rear View Mirror; Power Mirror Switch; Mirror Switch; Switch, Rear View Mirror
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.2 x 3.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10195585
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Camaro Submodels:
- Base, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

2000 Chevrolet Camaro Mirror Switch

With a comprehensive array of OEM 2000 Chevrolet Camaro Mirror Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Camaro Mirror Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Camaro Mirror Switch Parts and Q&A

Q: How to remove and install the power mirror switch on 2000 Chevrolet Camaro?
A: In order to install the power mirror switch, cushion the trim panel with rag and pry off the switches. Slide them to unscrew them off the door trim panel. Unconnect the electrical connector and take out the switch. To install the electrical connector, reconnect the connector and reinsert the switches into the panel.