How to replace the canister purge valves on 2000 Chevrolet Camaro?

Begin by turning off ignition and disconnecting the electrical connector from the evap canister purge valve. First disconnect the evap canister purge pipe from the evap purge valve before removing its retaining bolt. Remove the evap canister purge valve from its position on the Intake Manifold as the next step. During installation place the evap canister purge valve on the Intake Manifold while using the correct fasteners in the proper locations due to replacement part numbers matching the specification. Paints and lubricants and corrosion inhibitors must not be used on fasteners and joint surfaces unless explicitly mentioned because they interfere with torque and clamp force performance. Tighten down the evap canister purge valve retaining bolt to 10 nm (89 in lb). To finish the process you must connect both the electrical connector to the evap canister purge valve and also connect the evap purge pipe to the evap purge valve.

OEM 2000 Chevrolet Camaro Canister Purge Valves

Fuel Tank Evaporator Purge Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Canister Purge Valves found

View related parts
2000 Chevrolet Camaro Solenoid Valve Part Number: 13575703
$29.13 MSRP: $54.70
You Save: $25.57 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Solenoid Assembly-Evaporator Emission Canister; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Control Valve; Shut-Off Valve; Fuel Tank Vent; Vapor Valve; Vent Control Solenoid; Fuel Tank Evaporator/Purge Control
- Replaces: 10293954, 10337458, 20761332
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13575703
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Camaro Submodels:
- Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
2000 Chevrolet Camaro Purge Valve Part Number: 1997279
$41.89 MSRP: $74.80
You Save: $32.91 (44%)
Product Specifications
- Other Name: Valve, Evaporator Emission Canister Purge Solenoid; Vapor Canister Purge and Vent Solenoid.; Purge Solenoid; Purge Control Valve; Valve, Fuel Tank Evaporator/Purge Control
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1997279
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Camaro Submodels:
- Base | 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Camaro Solenoid Valve Part Number: 1997278
$38.93 MSRP: $69.54
You Save: $30.61 (45%)
Product Specifications
- Other Name: Valve, Evaporator; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Valve; Purge Solenoid; Purge Control Valve; Solenoid; Valve, Fuel Tank Evaporator/Purge Control
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.7 x 2.9 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1997278
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Camaro Submodels:
- Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

2000 Chevrolet Camaro Canister Purge Valves

With a comprehensive array of OEM 2000 Chevrolet Camaro Canister Purge Valves, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Camaro Canister Purge Valves are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Camaro Canister Purge Valves Parts and Q&A

Q: How to replace the canister purge valves on 2000 Chevrolet Camaro?
A: Begin by turning off ignition and disconnecting the electrical connector from the evap canister purge valve. First disconnect the evap canister purge pipe from the evap purge valve before removing its retaining bolt. Remove the evap canister purge valve from its position on the Intake Manifold as the next step. During installation place the evap canister purge valve on the Intake Manifold while using the correct fasteners in the proper locations due to replacement part numbers matching the specification. Paints and lubricants and corrosion inhibitors must not be used on fasteners and joint surfaces unless explicitly mentioned because they interfere with torque and clamp force performance. Tighten down the evap canister purge valve retaining bolt to 10 nm (89 in lb). To finish the process you must connect both the electrical connector to the evap canister purge valve and also connect the evap purge pipe to the evap purge valve.