How to Service and Repair the Power Steering Cooler on 2000 Cadillac Eldorado?

Service and repair of the Power Steering Cooler begins with disconnecting the steering gear to cooler hose and cooler to reservoir hose at the cooler. You should remove the bolts which hold the cooler onto the crossmember while removing it from the vehicle. Position the cooler into its vehicle location then fasten it to the crossmember by two bolts that require tightening to 65 nm (53 inch lbs.). Then connect the cooling hoses to the cooler (1,2) while performing power steering system bleeding procedures.

OEM 2000 Cadillac Eldorado Power Steering Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Cooler found

View related parts
2000 Cadillac Eldorado Power Steering Cooler Part Number: 26020183
Product Specifications
- Other Name: Pipe Assembly; Cooler; Cooler, Power Steering Fluid
- Item Weight: 1.70 Pounds
- Item Dimensions: 22.7 x 4.5 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26020183
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Eldorado Submodels:
- Base, ESC, ETC, Sport, Touring | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS

2000 Cadillac Eldorado Power Steering Cooler

With a comprehensive array of OEM 2000 Cadillac Eldorado Power Steering Cooler, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Cadillac Eldorado Power Steering Cooler are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Cadillac Eldorado Power Steering Cooler Parts and Q&A

Q: How to Service and Repair the Power Steering Cooler on 2000 Cadillac Eldorado?
A: Service and repair of the Power Steering Cooler begins with disconnecting the steering gear to cooler hose and cooler to reservoir hose at the cooler. You should remove the bolts which hold the cooler onto the crossmember while removing it from the vehicle. Position the cooler into its vehicle location then fasten it to the crossmember by two bolts that require tightening to 65 nm (53 inch lbs.). Then connect the cooling hoses to the cooler (1,2) while performing power steering system bleeding procedures.