ChevyParts
My Garage
My Account
Cart
OEM 2000 Buick Regal Starter
Starter Ignition- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Starters found
2000 Buick Regal Starter Part Number: 10465421
Product Specifications- Other Name: Starter, Starter Motor; Starter Motor
- Item Weight: 9.00 Pounds
- Item Dimensions: 12.6 x 6.7 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10465421
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2000 Buick Regal Starter Assembly Part Number: 10465309
Product Specifications- Other Name: Starter, Starter Motor; Starter
- Replaces: 10465156
- Item Weight: 8.80 Pounds
- Item Dimensions: 6.1 x 6.1 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10465309
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2000 Buick Regal Starter
With a comprehensive array of OEM 2000 Buick Regal Starter, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Regal Starter are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2000 Buick Regal Starter Parts and Q&A
- Q: How to replace the starter motor PG260 F2 or PG260 M on this on 2000 Buick Regal?A: The Starter motor pg 260 f2 or pg260 m deployed on this vehicle is non-serviceable and has to be changed as a whole unit. Start by removing the battery negative cable, followed by lifting and supporting the vehicle. Bolt off the front lower air deflector panel and the torque converter covers. I disconnected the positive Battery Cable at the Starter motor by removing the battery terminal nut of the Starter solenoid bat then disconnected the Starter solenoid wire by removing the Starter solenoid s terminal nut. Next, take off the Starter bolts (1,2) and the Starter motor and remove any shims. Make sure that it is right Starter motor that you are installing, align the Starter motor to the engine and reinstall any shims that have been removed. Install the Starter bolts (1,2) finger tight until seated and then fully tighten to 43 n.m (32 lb ft). Connect the positive Battery Cable and attach the Starter motor solenoid bat terminal nut finger tight, and then attach the Starter solenoid wire to the Starter solenoid s terminal nut finger tight. Screw the terminal nut of the solenoid bat / to /9.5 n.m / 84 lb in/ and the terminal nut of the Starter solenoid s/ to / 2.3 n.m / 20.4 lb in ./ finally, reinstall the torque converter covers, front lower air deflector panel and lower the vehicle and reconnect the battery negative cable.
