How to replace the rear Trunk Lock Cylinder on 2000 Buick Park Avenue?

The rear compartment lid lock cylinder needs replacing through these steps: first take the back up lamp assembly and rear compartment lid trim off. You need to remove the three nuts holding the lock cylinder to the lid. After that, take out the lock cylinder from the lid. To install the lock cylinder put it onto the lid and keep the fastener notice area of cautions and notices in mind. Arrest the lock cylinder to the lid with three nuts then press them to torque levels of 9 n.m (80 lb in). Reinstall the back up lamp first and then put back the rear compartment lid trim.

OEM 2000 Buick Park Avenue Trunk Lock Cylinder

Back Door Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Trunk Lock Cylinder found

View related parts
2000 Buick Park Avenue Lock Cylinder, Rear Part Number: 12455155
Product Specifications
- Other Name: Cylinder Kit, Rear Compartment; Trunk Lock Cylinder; Door Lock Cylinder
- Position: Rear
- Item Weight: 0.90 Pounds
- Item Dimensions: 6.3 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12455155
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2000 Buick Park Avenue Trunk Lock Cylinder

With a comprehensive array of OEM 2000 Buick Park Avenue Trunk Lock Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Park Avenue Trunk Lock Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick Park Avenue Trunk Lock Cylinder Parts and Q&A

Q: How to replace the rear Trunk Lock Cylinder on 2000 Buick Park Avenue?
A: The rear compartment lid lock cylinder needs replacing through these steps: first take the back up lamp assembly and rear compartment lid trim off. You need to remove the three nuts holding the lock cylinder to the lid. After that, take out the lock cylinder from the lid. To install the lock cylinder put it onto the lid and keep the fastener notice area of cautions and notices in mind. Arrest the lock cylinder to the lid with three nuts then press them to torque levels of 9 n.m (80 lb in). Reinstall the back up lamp first and then put back the rear compartment lid trim.