OEM 2000 Buick LeSabre Oil Filter

2000 Buick LeSabre Oil Filter Parts and Q&A

• Q: How to service the oil filter on 2000 Buick LeSabre?

  A: To service the Oil Filter, first, keep the vehicle raised in such a way that it is comfortably supported. Place the oil drain pan under the Drain Plug of the engine oil and remove the engine oil Drain Plug. Clean and check the engine oil Drain Plug and repair or replace the plug if requirement, and also clean and check sealing surface on Oil Pan, repair or replace the Oil Pan if necessary. Then get rid of the Oil Filter and clean up its sealing area at the Oil Filter adapter then repair or replace it if there is any problem with it. For installation, slightly oil the gasket of the replacement Oil Filter by using clean oil, and mount the new Oil Filter, tightening it about 3/4 to 1 full turn after the gasket meets the mounting surface. Install the engine oil Drain Plug and tighten it to the torque of 30 nm (22 ft. Lbs). Lower the car and replenish the engine with new engine oil, after which check for oil leaks once the engine has started.