Make sure this part fits

GM 15206532
Window Switch, Rear Passenger Side

2001-2007 GM

Customer Questions & Expert Answers (18)
GM 15206532 Window Switch, Rear Passenger Side
GM 15206532 Window Switch, Rear Passenger Side
  • Part Description
    Switch, Rear Side Door Window
  • Position
    Rear Passenger Side
  • Manufacturer
    General Motors
Make sure this part fits
$69.59 MSRP: $133.88
You Save: $64.29 (49%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2003-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2007 Chevrolet Silverado 1500Base, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15206532 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 15206532 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    How do you start replacing the rear door power window switch for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Begin by using a small flat-bladed tool to carefully pry the door power window switch from the door trim panel.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Power Window Switch
    Q:
    What should be done after securing the switch panel bezel for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Reconnect the electrical connectors and reinstall the front door trim panel.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Power Window Switch
    Q:
    How do you secure the switch panel bezel to the front door panel for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Install the screw that retains the switch panel bezel to the front door panel, tightening it to 2 N.m (18 lb in), and reconnect the electrical connectors.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Power Window Switch
    Q:
    How do you remove the power window switch from the rear door for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Carefully pry the door power window switch from the door trim panel using a small flat-bladed tool, then disconnect the electrical connector from the switch.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Power Window Switch
    Q:
    What is the process for installing the new power window switch for the 2006 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Connect the electrical connector to the switch and press the switch into place on the door trim panel until it is fully seated.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Power Window Switch
    Q:
    What should you do after removing the switch for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Disconnect the electrical connector from the switch.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Power Window Switch
    Q:
    What should be done after removing the front door trim panel for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Remove the screw that retains the switch panel bezel from the front door panel and carefully detach the bezel using a flat-bladed tool.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Power Window Switch
    Q:
    How do you remove the door module from the switch panel bezel for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Use a wide plastic flat-bladed tool to release the retaining clips on both sides of the door module and remove the door module from the switch panel bezel.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Power Window Switch
    Q:
    What is the first step for installation for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Connect the electrical connector to the switch.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Power Window Switch
    Q:
    What is the first step to replace the power door lock switch for the driver side for the 2006 Chevrolet Tahoe? Posted by Customer
    A:
    Begin by removing the front door trim panel and disconnecting the electrical connectors.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Power Window Switch
    Q:
    What is the first step to replace the door lock and side window switch on the passenger side for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Begin by removing the front door trim panel.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Power Window Switch
    Q:
    What is the process for installing the new power window switch for the 2006 Chevrolet Suburban 1500? Posted by Customer
    A:
    Connect the electrical connector to the switch and press the switch into place on the door trim panel until it is fully seated.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Power Window Switch
    Q:
    What additional step is needed if equipped with camper mirrors for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Program the door module using the Service Programming System (SPS).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Power Window Switch
    Q:
    What is the first step for installation of the new switch for the 2004 GMC Yukon? Posted by Customer
    A:
    Connect the electrical connector to the switch.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Power Window Switch
    Q:
    What is the final step after reinstalling the front door trim panel for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Perform the necessary setup and programming procedures for the door control module.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Power Window Switch
    Q:
    What tool is needed to release the retaining clips on both sides of the door module for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    A wide plastic flat-bladed tool is needed to release the retaining clips.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Power Window Switch
    Q:
    What is the first step to replace the rear side door window switch for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Use a small flat-bladed tool to carefully pry the door power window switch from the door trim panel.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Power Window Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Window Switch, Rear Passenger Side 15206532 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15206532 Window Switch, Rear Passenger Side is available in the market under the name GM Power Window Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15206532 Window Switch, Rear Passenger Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by Manufacturer Part Number 15206532 maintains top performance when functioning as the Switch, Rear Side Door Window unit at its Rear Passenger Side. The component 15206532 is constructed from durable material and its dimensions span 3.7 x 2.7 x 2.3 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Switch, Door And End Gate Electrical. The part 15206532 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.