Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 12471487
Axle Shaft, Rear

2001-2007 GM

Customer Questions & Expert Answers (18)
GM 12471487 Axle Shaft, Rear
  • Part Description
    Shaft, Rear Axle Drive
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 12471487 Axle Shaft, Rear is Ref No. 3 in the diagram below

    2004 Chevy Silverado 1500 Axle Shaft, Rear Diagram for 12471487
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 12471487

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 12471487 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 12471487 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What are the final steps after installing the axle shaft for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Reinstall the tire and wheel assembly, inspect and add axle lubricant to the axle housing if necessary, and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done after aligning the holes for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Install the axle flange bolts, tightening them to 156 Nm (115 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    How do you remove the lock clip from the axle shaft end for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    The lock clip is spring loaded and fits securely in the axle shaft slot; it may require a screwdriver or related tool to push it off the shaft end. Pushing the axle shaft inwards towards the gears can assist in this process.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done once the axle shaft is removed for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Take out the gasket and clean the axle shaft flange and the outside face of the hub assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the torque specification for the 10.5 inch axle bolts for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Tighten the bolts to 156 Nm (115 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the first step in the installation process for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Begin by installing the axle shaft and then the spring loaded lock clip at the axle shaft end.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What do you do after removing the axle shaft for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Pull the axle shaft out of the tube and remove the gasket, ensuring to clean the axle shaft flange and the outside face of the hub assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be removed after raising for the 2004 Chevrolet Suburban 1500? Posted by Customer
    A:
    Remove the tire and wheel assembly, then take out the rear steering gear assembly and the steering knuckle assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the torque specification for the 10.5 inch axle bolts for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Tighten the bolts to 156 Nm (115 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What are the final steps after installing the axle shaft for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Reinstall the rear cover and gasket, the brake caliper, and the tire and wheel assembly. Finally, fill the rear axle with the proper fluid and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done to remove the C-lock for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Carefully remove the C-lock from the button end of the axle shaft without rotating the shaft to avoid misaligning the gears.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the first step to replace the rear axle shaft on an 8.6 Inch Axle with Drum Brakes (NON-VSES) for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    First, raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done with the gasket during the removal process for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the gasket and ensure to clean the axle shaft flange and the outside face of the hub assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    How do you create clearance for the C-lock for the 2004 GMC Yukon? Posted by Customer
    A:
    Push the flange of the axle shaft toward the differential, and if necessary, tap it with a soft-faced mallet.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be removed after the rear steering gear assembly for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Remove the steering knuckle assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    Why is it important not to rotate the axle shaft during removal for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Rotating the axle shaft can cause misalignment of the gears, complicating reassembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done for axles with a locking differential during installation for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Keep the pinion shaft partially withdrawn and place the C-lock on the axle shaft so that the ends are flush with the thrust block.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Axle Shaft, Rear 12471487 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12471487 Axle Shaft, Rear is available in the market under the name GM Axle Shaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12471487 Axle Shaft, Rear fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by Manufacturer Part Number 12471487 maintains top performance when functioning as the Shaft, Rear Axle Drive unit at its Rear. The component 12471487 is constructed from durable material and its dimensions span 41.3 x 4.5 x 4.8 inches while weighing 18.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Axle Shafts. The part 12471487 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 12471487. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.