Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 12600767
Water Pump

2007-2011 GM

Customer Questions & Expert Answers (15)
GM 12600767 Water Pump
  • Part Description
    Pump, Water; Engine Water Pump
  • Replaces
    12587305
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 12600767 Water Pump is Ref No. 9 in the diagram below

    2008 GMC Yukon XL 2500 Water Pump Diagram for 12600767
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 12600767

  • Vehicle Fitment

    Year Make Model Trim Engine
    2007 Buick RainierCXL8 Cyl 5.3 L GAS
    2007-2010 Cadillac EscaladeBase, Hybrid, Hybrid Platinum, Platinum8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2011 Cadillac Escalade EXTBase, Luxury, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2011 Chevrolet AvalancheLS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2009 Chevrolet ColoradoLT8 Cyl 5.3 L GAS
    2008-2010 Chevrolet Express 1500Base, LS, LT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2008-2010 Chevrolet Express 2500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    2008-2010 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    2007-2009 Chevrolet Silverado 1500Hybrid, LS, LT, LTZ, WT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 12600767 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 12600767 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the installation procedure for the new water pump for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Position the water pump with new gaskets to the engine block and install the water pump bolts, tightening them first to 15 N.m and then to a final torque of 30 N.m.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What is the procedure for the radiator outlet hose for the 2007 Cadillac Escalade EXT? Posted by Customer
    A:
    Reposition the radiator outlet hose clamp at the water pump and remove the radiator outlet hose, followed by repositioning the outlet hose.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What tool is used to secure the water pump pulley for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Use the J 46406 (Fan Clutch Remover and Installer) to secure the water pump pulley.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What is the first step for installation for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Start by installing the auxiliary water pump to the auxiliary water pump bracket and then install the clips to the bracket.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What is the first step to replace the water pump on LH6, LY2, LY5, and LMG engines for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the air cleaner outlet duct and drain the cooling system.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What is the first step to replace the water pump on 4.8L, 5.3L, and 6.0L engines for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Begin by draining the cooling system.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What is the torque specification for the water pump bolts during installation for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    Install the water pump bolts (301), tightening them first to 15 Nm (11 lb ft) and then to a final torque of 30 Nm (22 lb ft).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What should be reinstalled after the hoses for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Reinstall the cooling fan and shroud, the accessory drive belt tensioner, and the air cleaner outlet duct and bolt.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What is the final step after reinstalling the drive belt and the fan for the 2009 GMC Canyon? Posted by Customer
    A:
    Fill the cooling system with the specified coolant and concentration, and inspect for leaks.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What is the first step to replace the water pump (LU3) for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    Gather the necessary tools: Fan Clutch Remover and Installer (J 41240).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What should be done with the auxiliary heater hoses for the 2008 GMC Envoy? Posted by Customer
    A:
    Reposition the auxiliary heater inlet and outlet hose/pipe clamps at the water pump and remove the inlet and outlet hoses/pipes.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What is the next step after disconnecting the electrical connector for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the nuts from the auxiliary water pump bracket and take out the auxiliary water pump from the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What do you do with the heater inlet hose clamp for the 2010 GMC Yukon? Posted by Customer
    A:
    Reposition it at the water pump and remove the heater inlet hose.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    How do you remove the water pump for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Remove the water pump bolts and the water pump along with the gaskets, discarding the gaskets.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Water Pump 12600767 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12600767 Water Pump is available in the market under the name GM Water Pump. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12600767 Water Pump fits certain Chevrolet Colorado, Tahoe, Avalanche models, as well as GMC Sierra 1500, Yukon, Canyon. Additionally, it is compatible with Cadillac Escalade, Escalade EXT and Buick Rainier models.
The original GM component designated by Manufacturer Part Number 12600767 maintains top performance when functioning as the Pump, Water; Engine Water Pump unit. The component 12600767 is constructed from durable material and its dimensions span 21.8 x 12.0 x 9.5 inches while weighing 12.40 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Water Pump Assembly. The part 12600767 has available replacement options 12587305. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.