Make sure this part fits

GM 19152685
Brake Pads

1997-2005 GM

Customer Questions & Expert Answers (6)
GM 19152685 Brake Pads
GM 19152685 Brake Pads
  • Part Description
    Pad Kit, Brake; Disc Brake Hardware Kit
  • Position
    Rear
  • Replaces
    18023377, 18029844
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    1997-2004 Buick Regal25th Anniversary Edition, GS, GSE, LS, LSE6 Cyl 3.8 L GAS
    2001-2005 Chevrolet ImpalaBase, LS, LS Sport, SS6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    2001-2005 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    2005 Chevrolet VentureLS, LT, Plus6 Cyl 3.4 L GAS
    1999-2004 Oldsmobile AleroGL, GLS, GX4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    1998-2002 Oldsmobile IntrigueBase, GL, GLS, GX6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
    1999-2005 Pontiac Grand AmGT, GT1, SE, SE1, SE24 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    1997-2003 Pontiac Grand PrixGT, GTP, SE6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
    2005 Pontiac MontanaBase6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19152685 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 19152685 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the next step after securing the caliper for the 2002 Buick Century? Posted by Customer
    A:
    Remove the wheel lug nut retaining the rotor, install the rear tire and wheel assembly, aligning previous marks, and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Pad
    Q:
    How do you compress the front caliper piston for the 2003 Buick Regal? Posted by Customer
    A:
    Use a large C-clamp placed over the caliper housing against the back of the outboard pad, tightening it until the piston is pushed into the caliper bore enough to slide the caliper off the rotor.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Pad
    Q:
    What is the final step after seating the brake components for the 2001 Chevrolet Impala? Posted by Customer
    A:
    Fill the brake master cylinder reservoir to the proper level and burnish the pads and rotors.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Pad
    Q:
    When should burnishing be done for the 2003 Chevrolet Monte Carlo? Posted by Customer
    A:
    Burnishing should be done whenever the disc brake rotors have been refinished or replaced, or whenever the disc brake pads have been replaced.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Pad
    Q:
    What are the final steps after securing the caliper for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Remove the wheel nuts, install the tire and wheel, lower the vehicle, and fill the master cylinder with clean brake fluid.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Brake Pads 19152685 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19152685 Brake Pads is available in the market under the name GM Brake Pad. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19152685 Brake Pads fits certain Chevrolet Impala, Monte Carlo, Venture models, as well as Buick Regal, Century. Additionally, it is compatible with Pontiac Grand Prix, Grand Am, Montana and Oldsmobile Alero, Intrigue models.
The original GM component designated by Manufacturer Part Number 19152685 maintains top performance when functioning as the Pad Kit, Brake; Disc Brake Hardware Kit unit at its Rear. The component 19152685 is constructed from durable material and its dimensions span 9.9 x 4.7 x 3.3 inches while weighing 2.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rear Pads. The part 19152685 has available replacement options 18023377, 18029844. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.