Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 88894294
Intake Manifold, Lower

2002-2007 GM

Customer Questions & Expert Answers (11)
GM 88894294 Intake Manifold, Lower
  • Part Description
    Manifold Kit, Lower Intake
  • Position
    Lower
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 2006 Chevy Express 2500 Intake Manifold, Lower Diagram for 88894294
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 88894294

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Chevrolet AstroBase, LS, LT6 Cyl 4.3 L GAS
    2003-2007 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS
    2003-2006 Chevrolet Express 2500Base, LS6 Cyl 4.3 L GAS
    2003-2006 Chevrolet Silverado 1500Base, LS, LT, WT6 Cyl 4.3 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, WT6 Cyl 4.3 L GAS
    2002-2005 GMC SafariBase, SL, SLE, SLT6 Cyl 4.3 L GAS
    2003-2007 GMC Savana 1500Base, LS, LT, SLE6 Cyl 4.3 L GAS
    2003-2006 GMC Savana 2500Base, SLE6 Cyl 4.3 L GAS
    2003-2006 GMC Sierra 1500Base, SL, SLE, SLT, WT6 Cyl 4.3 L GAS
    2007 GMC Sierra 1500 ClassicSL, WT6 Cyl 4.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 88894294 compatible with my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 88894294 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What cables need to be disconnected from the throttle shaft and bracket for the 2002 Chevrolet Astro? Posted by Customer
    A:
    The accelerator control cable and, if equipped, the cruise control cable.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What is the procedure for installing the EGR pipe for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    If equipped, position a new EGR pipe gasket on the exhaust manifold and install the EGR pipe (with valve), tightening the EGR pipe bolts to the specified torque values.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    How should the intake manifold bolts be tightened for the 2006 Chevrolet Express 2500? Posted by Customer
    A:
    Tighten the intake manifold bolts in sequence to 5 Nm (44 inch lbs.) for the first pass and then to 10 Nm (89 inch lbs.) for the final pass.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    How do you finish the installation process for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Reattach the accelerator control cable bracket with cables to the throttle body, tighten the nuts to 9 Nm (80 inch lbs.), connect the A/C compressor clutch and A/C pressure switch if equipped, install the accelerator cable to the bracket and throttle body lever, reconnect the cruise control cable if equipped, position the heater hoses, and reinstall the fuel pipes/hoses and distributor before filling the cooling system.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What should be done after disconnecting the TP sensor and IAC motor for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Continue by disconnecting the evaporative emission (EVAP) canister purge solenoid valve and manifold absolute pressure (MAP) sensor connectors, then remove the EVAP canister harness from the purge solenoid valve and the engine wiring harness bracket nuts.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What should be disconnected next for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Disconnect the electrical connectors for the A/C compressor clutch and A/C pressure switch, if equipped, and remove the engine wiring harness clip from the accelerator control cable bracket.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What should be done with the electrical harness after installation for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Route the electrical harness back into position, reconnect the knock sensor harness, and the electrical connectors for the MAP sensor, knock sensor, and EGR valve if equipped.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What components need to be removed next for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Remove the MAP sensor and the Evaporative Emission (EVAP) purge solenoid vent tube by detaching it from the solenoid and vapor pipe.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What should be done if reusing the fastener for the fuel pipe bolt for the 2003 GMC Safari? Posted by Customer
    A:
    Apply threadlock (GM P/N 12345382 or Canadian P/N 10953489) to the threads, install the bolt, and tighten the fuel pipe bracket nuts to 3 Nm (27 lb.in.) and the fuel pipe bolt to 6 Nm (53 lb.in.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What should be applied to the threads of the intake manifold bolts for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Apply a 5 mm (0.20 inch) band of threadlock GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the threads of the intake manifold bolts.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Intake Manifold, Lower 88894294 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88894294 Intake Manifold, Lower is available in the market under the name GM Intake Manifold. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88894294 Intake Manifold, Lower fits certain Chevrolet Silverado 1500, Astro, Express 1500 models, as well as GMC Sierra 1500, Safari, Savana 2500 models.
The original GM component designated by Manufacturer Part Number 88894294 maintains top performance when functioning as the Manifold Kit, Lower Intake unit at its Lower. The component 88894294 is constructed from durable material and its dimensions span 21.7 x 17.8 x 15.2 inches while weighing 19.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Manifold; Manifold Kit, Engine Fuel Intake Manifold. The part 88894294 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.