Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19418186
Intake Manifold

2004-2007 GM

Customer Questions & Expert Answers (14)
GM 19418186 Intake Manifold
  • Part Description
    Manifold, Engine Fuel Intake Manifold
  • Replaces
    89017363
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2005-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2005-2006 Chevrolet Avalanche 1500Base, LS, LT, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2005-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2005-2006 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS
    2005-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 19418186 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 19418186 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What should be connected after reinstalling the EVAP purge solenoid for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Connect the EVAP purge solenoid vent tube to the solenoid and vapor pipe.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What should be reinstalled after the intake manifold for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Reinstall the EVAP purge solenoid, isolator, and bolt, tightening the bolt to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What is the procedure for tightening the intake manifold bolts for the 2006 Chevrolet Suburban 1500? Posted by Customer
    A:
    Apply a 5 mm (0.20 inch) band of threadlock to the threads of the intake manifold bolts, and tighten them in sequence to 5 Nm (44 inch lbs.) for the first pass, followed by a final pass to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    How do you access the front intake manifold bolt for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the drive belt, loosen the power steering (P/S) pump rear bracket nut, and remove the front nut and bolts for the P/S pump bracket, sliding it forward to access the bolt.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    Which electrical connectors should be disconnected for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Disconnect electrical connectors for the A/C compressor clutch, A/C pressure switch, throttle position (TP) sensor, idle air control (IAC) motor, control port injector module, EVAP canister purge solenoid valve, and manifold absolute pressure (MAP) sensor.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What is the first step to replace the intake manifold for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    First, remove the throttle body and fuel injectors.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What is the final step in the installation process for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Finally, install the intake manifold sight shield to the retainer and tighten the bolt to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What should be done to the intake manifold before installation for the 2006 Chevrolet Tahoe? Posted by Customer
    A:
    Clean and inspect the intake manifold if necessary.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What should be done after installing the intake manifold-upper for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Install the accelerator cable bracket and its nuts to 12 Nm (106 inch lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What should be done with the engine harness after disconnecting the components for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Reposition the engine harness to the driver's side of the engine compartment.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What should be applied to the threads of the intake manifold bolts for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Apply a 5 mm (0.20 inch) band of threadlock GM P/N 12345382 (Canadian P/N 10953489) to the threads.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What is the procedure for tightening the intake manifold bolts for the 2006 GMC Yukon? Posted by Customer
    A:
    Apply a 5 mm (0.20 inch) band of threadlock to the threads of the intake manifold bolts, and tighten them in sequence to 5 Nm (44 inch lbs.) for the first pass, followed by a final pass to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    Which electrical connectors need to be disconnected from the engine harness for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Disconnect the connectors from the EVAP canister purge solenoid, manifold absolute pressure (MAP) sensor, ignition coil harness, left side fuel injectors, throttle actuator, engine coolant temperature (ECT) sensor, and right side fuel injectors.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Intake Manifold 19418186 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19418186 Intake Manifold is available in the market under the name GM Intake Manifold. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19418186 Intake Manifold fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT and Hummer H2 models.
The original GM component designated by Manufacturer Part Number 19418186 maintains top performance when functioning as the Manifold, Engine Fuel Intake Manifold unit. The component 19418186 is constructed from durable material. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Manifold. The part 19418186 has available replacement options 89017363. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.